


Portable Mini Solar Panel 1.1W 6V 180mA (99 x 69mm)
- Mini polycrystalline solar panel rated about 1.1 W at 6 V / 180 mA.
- Compact approximately 99 × 69 mm panel for portable and educational solar projects.
- Useful for small chargers, sensor nodes, and solar-demo experiments in good sunlight.
- Output depends on irradiance, angle, and temperature.
- Panel only; charge controller, battery, and cable harness are not included.
Product Details
Portable Mini Solar Panel 1.1W 6V 180mA (99 x 69mm)
A compact mini solar panel for low-power DIY energy experiments, approximately 1.1 W with a nominal 6 V / 180 mA rating and about 99 × 69 mm outline. This listing is for the panel only.
What it does
- Converts sunlight into DC power for small educational and portable loads.
- Nominal rating around 1.1 W, 6 V, 180 mA under stated test conditions.
- Compact footprint suits backpack demos and desktop solar labs.
- Flying leads or solder pads (by revision) for straightforward hookup.
Compatibility and setup
- Expect lower current indoors or under clouds; outdoor direct sun is required for near-rated output.
- Use a suitable charge controller or diode protection before connecting lithium cells.
- Do not short the outputs for long periods; observe polarity.
- Not a grid-tied inverter panel; for low-voltage DIY use only.
Applications
- Small solar charger prototypes
- Educational renewable-energy demos
- Low-power sensor node experiments
- Portable DIY solar kits
Package includes
- 1 × mini solar panel (approx. 99 × 69 mm)
Nameplate ratings are typical; measure open-circuit voltage and short-circuit current for your unit. See the Specifications section for listed ratings when present.
















